Cost-Effective Large Span Building Steel Structure Grid Frame Roof Solutions

• Customization: Available
• After-sales Service: Installation Guide
• Warranty: 1-3 Years
• Thermal Conductivity: 10W/(M·K)
• Compressive Strength: 100MPa
• Shape: Rectangle
• Thickness: 250mm
• Dosage Form: Steel Plate
• Density: 7850kg/M³
• Transport Package: Pallets, Rainproof Film Packaging
• Specification: 300mm
• Trademark: Ansha, Hebei, China
• Origin: Hengshui, Hebei, China
• Production Capacity: 50000 Pieces/Year

Product Description

Product Description

Most of the bracket plans for the cast-in-place section of the bridge use drop blocks as the bracket landing device. When actually dropping the brackets, the height of the upper horizontal support can be reduced by moving the two vertical supports away from each other. The existing drop blocks The device relies on the positioning of the pull screw screwed with a compression nut to achieve removal, and the maximum load-bearing capacity can be 200 tons. It can be used in turnaround, has convenient height adjustment, high precision and low dismantling cost. Compared with the traditional unloading device, it fully reflects its advantages of professionalism, safety, economy and convenience.

Detailed Photos

 

 

Application Scope

It is suitable for cast-in-place cap beam brackets, cast-in-place box girder brackets, prefabricated cap beam mounting brackets, steel box girder mounting brackets and other bracket systems. It is specially used to remove the bracket before dismantling the bracket after the bridge structure construction on the upper part of the bracket is completed. It is effective. It overcomes the problems of unclear bearing capacity of traditional sand buckets and cumbersome and slow sand discharge.
 

Product Parameters

The unloading block and unloading device are divided into type A, type B, 100 tons and 200 tons according to the model. Different sizes can be adopted according to different requirements of the current factory.
Type A 300*200*250mm load range is 100 tons
Type B 450*350*340mm, load range is 200 tons


 

Company Profile

 

Hebei Ansha New Material Technology Co., Ltd. is located in Binhu New District of Hengshui City. We specialize in R&D and production of seismic isolation and damping products for both buildings and bridges. Our products include rubber bearings, spherical bearings, friction pendulum systems, fluid viscous dampers, tuned mass dampers, buckling-restrained braces, friction dampers and metallic dampers. In addition, we manufacture bridge expansion joints and fiber-enhanced plastic products.
We have established state-of-the-art physical and chemical laboratories and specialized production lines. Our company operates in full compliance with the ISO9001:2015 Quality Management System, ISO14001:2015 Environmental Management System, and ISO45001:2018 Occupational Health and Safety Management System.
Guided by the anti-seismic design principle of "resisting collapse in a major earthquake, enabling repair in a moderate earthquake, and remaining undamaged in a minor earthquake", we offer our customers a comprehensive array of services. These services include technical consultation, structural analysis and calculation, design optimization, research and development, manufacturing, installation guidance, performance monitoring, maintenance and repair.

 

 

Our Advantages

1. Advanced equipment. Our workshop has more than 100 pieces of the most advanced equipment to ensure timely delivery of large orders. In addition, standardized production can be guaranteed to comply with international standards.

2. Experienced and skilled technical and production teams have professional production skills and many years of experience. Our team of workers can improve production efficiency, shorten the production cycle, and thereby reduce costs.
3. Complete product models, we have a variety of bearings for construction, including basin bearings, elastic skateboard bearings, spherical bridge bearings, high damping spherical bearings, lead rubber bearings, etc.
4. Exquisite packaging and timely delivery. All products are inspected by quality inspection personnel before loading, and then the quality inspection data are archived and retained. Our company also produces isolation products and vibration control products.
5. The professional sales team has a comprehensive understanding of shock absorption and isolation products, good English speaking and writing skills, and excellent communication skills to provide the best solutions to your problems. You can ask them for recommendations, customized services, and any other product information you want to know about.

FAQ

1. Are you a trading company or manufacturer?
   We are manufacturer and have our own factory
2. What certificate do you get?
    ISO9001:2015 quality management system certification,
    ISO14001:2015 environmental management system certification, 
    ISO45001:2018 occupational health and safety management system certification

3. What is your MOQ?
      2 Sets
4. What is your delivery time for mass production?
     Customized product design time: Based on the performance parameters provided, the detailed design of the product will be completed within 7 working days
      Peak season delivery time: 1.5~2 months after confirmation of product processing drawings
      Off-season delivery time: Within 25~35 working days after confirmation of product processing drawings
5. Can you do OEM?
      We can. OEM orders are welcome.
6. What is your policy sample?
    We provide free scale samples, and buyers bear the express delivery costs.
7. How long does it take to prepare samples?
     About 7-10 working days.